很多变压器磁芯中柱开气隙后要求点胶,点胶主要是减震降低嗓音，防止磁芯在磁场的作用下发生震动而产生的噪声

降低变压器本体噪声,平稳、隔振调整

那变压器磁芯中柱用什么胶好呢？考虑到磁芯的易碎及电感的敏感性，行业上大部分采用的是软性的环氧树脂胶水，此类胶水固化后柔软，胶水自身应力较小，因此很适合中柱的填充，对磁芯及电感的影响很小。
华创材料磁芯中柱专用单组份软性环氧树脂胶，针对磁芯结构研发，市场应用近15年，品质稳定，性能优良。

硬度范围可调节，可依据实际产品要求调低硬度或调高硬度，粘度固化时间等均可依要求进行调整。

1、粘度调节：从具有较高之流动性到完全不流动

2、固化时间：固化时间可调快干（会影响储存期限）

3、硬度调节：硬度从20D-80D范围均可调试

4、功能调节：可调导热性；导热率可调节范围：0.3-1.5

H907-HF-Z系单组份含环氧树脂高弹性胶粘剂，广泛应用于各类电子元器件、电工电器、机电五金、磁性元件、光电产品、汽配组件等之粘接固定，对于金属、陶瓷、玻璃、纤维制品及硬质塑胶之间的封装粘接，有优异的粘接强度；磁芯中柱填充；在高温下具有较高之触变性，硬化后固化物具有很高的弹性、良好的粘接性能、优良的电气性能以及优越的防振动性能。

外观及物性：

外观                 粘稠膏状体

 颜色                黑色

比重（25℃）  1.4-1.5

粘度（25℃）  40000-60000 CPS

保存期限         25度2个月，5度3个月

包装               1KG或5KG

固化条件：  115- 120度1.5-2小时

固化物特性：

热线膨胀系数   cm/cm/℃    25×10-6/℃ 

接力强度       kg／cm2         25-35

硬    度           SHORE D       45-55

铁芯与铁芯粘接强度   KG     > 15

Many transformer cores require glue after the air gap is opened. The main purpose of glue dispensing is to reduce the noise caused by vibration of magnetic core under the action of magnetic field

Reduce the transformer body noise, stable, vibration isolation adjustment

What kind of glue should be used for the core of transformer? Considering the fragility of the magnetic core and the sensitivity of the inductance, the soft epoxy resin glue is mostly used in the industry. This kind of glue is soft after curing, and the stress of the glue itself is small. Therefore, it is very suitable for the filling of the central column, and has little influence on the magnetic core and inductance.

Huachuang materials magnetic core column special one component soft epoxy resin adhesive, for the magnetic core structure research and development, nearly 15 years of market application, stable quality, excellent performance.

The range of hardness can be adjusted, and the hardness can be reduced or increased according to the actual product requirements, and the viscosity curing time can be adjusted according to the requirements.

1. Viscosity adjustment: from high fluidity to no flow

2. Curing time: adjustable curing time and quick drying (affecting storage life)

3. Hardness adjustment: the hardness can be adjusted from 20d to 80D

4. Function adjustment: adjustable thermal conductivity; thermal conductivity adjustable range: 0.3-1.5

上一篇：TG150度灌封胶 耐高温环氧树脂灌封胶电子密封

下一篇：变压器磁芯用什么导电胶?变压器磁芯接地导电粘接胶水,替代铜箔提高效